There are many seal products for containers, such as plastic seals, bolt seals, plastic padlocks, and cable seals. Among them, cable seal is one of the most commonly used seals on the market, but many users do not know how to use the cable seal.

Here's how to use a wire seal:

1.Cut the required length of the seal wire, for example, 10cm, 15cm, etc., the seal wire could be plastic coated steel wire, iron thread seal line, colorful plastic coated wire and copper wire and so on.

2.Take out a seal bean, which generally have 3 holes: 2 on one side, 1 on the other side, insert the seal wire into the bottom hole of the 2 holes, which is also near the seal head, (also to cross the hoe on the spinner), then rotate one or two turns. 3.Then the bottom is fixed, and then pass the other head of the seal wire through the two holes outside the object you want to seal (such as the meter), then pass through the two holes in the seal, and then rotate the blade at the top of the seal clockwise.

4.Rotate until you think it is locked, stop spinning, and then cut off the top blade.

The above is the use of cable seals, isn’t it simple? In addition, the wire seal is a one-time lock that cannot be reused.